Integration · EDI
BorderConnect integration: file ACE and ACI eManifests from the load
Roadmark builds each crossing's ACE or ACI eManifest from the load, files it through your BorderConnect account, and shows CBP's or CBSA's answer on the load.
The short answer
BorderConnect and Roadmark, in short.
What syncs
| What | Direction | When |
|---|---|---|
| ACE eManifests: trip, truck, trailers, driver and shipments | →Roadmark to BorderConnect | When a person files, or by File when complete |
| ACI eManifests: trip, truck, trailers, driver and shipments | →Roadmark to BorderConnect | When a person files, or by File when complete |
| Corrections to a filed manifest | →Roadmark to BorderConnect | Until the truck reaches the border |
| Shipments taken off an ACE manifest | →Roadmark to BorderConnect | When a person removes them |
| Agency answers: sent, accepted, rejected with the reason, held, released | →BorderConnect to Roadmark | As BorderConnect posts them |
Setting up BorderConnect
1Get an eManifest API key from BorderConnect
Register for BorderConnect's eManifest API and ask for an API key and the address it is used at.
2Enter the key and the address in Roadmark
If BorderConnect files for this company as a service provider, also enter the company key it gave for the company.
3Give BorderConnect Roadmark's webhook address
Roadmark shows the connection's webhook address and secret. BorderConnect posts its notices there, so CBP's and the CBSA's answers reach the load.
4Check the connection, then file one crossing
Save, run Check now, and file one real crossing. Confirm the answer on the load matches what BorderConnect shows before relying on it for every trip.
Before you start
- A BorderConnect account with access to its eManifest API.
- Your SCAC for ACE (southbound) and your CBSA carrier code for ACI (northbound), entered in Roadmark's carrier identity settings.
- If BorderConnect files for several of your companies as a service provider, the company key for each one.
BorderConnect is an eManifest service founded in Windsor, Ontario, in 2004. Highway carriers use it to file ACE eManifests with U.S. Customs and Border Protection (CBP) and ACI eManifests with the Canada Border Services Agency (CBSA). The CBSA's list of ACI highway service providers includes it, and so does CBP's list of ACE truck manifest software developers. Neither agency endorses a provider by listing it. BorderConnect also offers an eManifest API so other software can send it manifests, and that's what Roadmark uses.
With the connection on, the eManifest is no longer typed into a separate portal. Roadmark builds it from the load, sends it to your BorderConnect account, and shows CBP's or the CBSA's answer on the load. Roadmark never talks to CBP or the CBSA itself: BorderConnect files, under your carrier code.
What gets filed, and under which code
Each manifest carries the trip and the shipments on it: the port of arrival and the estimated arrival time, the tractor with its VIN and plates, the trailers, the seals, the driver with a FAST card or a licence, and for each shipment the control number, the shipper, the consignee, the description, the quantity and weight, and any hazmat or HTS code. The ACE and ACI eManifest guide explains every field and the errors that stop trucks at the booth.
From the load to an accepted manifest
Load 48213, Mississauga ON to Joliet IL over the Blue Water Bridge, is the example from our cross-border page.
- The crossing is planned. Once the trip routes 48213 over the Blue Water Bridge, Roadmark knows it's a southbound ACE crossing, filed under Ashgrove Freight's SCAC.
- Roadmark composes the manifest from what the trip and its shipments already say. Anything missing, such as a trailer plate or a consignee's postal code, is listed in plain words against the shipment it belongs to, so the clerk fixes the load, not a form.
- Someone files it. A person with permission to file sends it in one step. A company can instead turn on File when complete for a direction: Roadmark then files a crossing by itself once nothing is missing and the truck is within the time you set before the border. It's off by default, and it's the company's setting, not an agent's: no AI agent files a manifest.
- BorderConnect files and answers. Its notices come back to Roadmark as they happen: sent, accepted, rejected with the reason and the fields marked, held for examination, released.
- The answer sits on the load. Dispatch sees the eManifest state next to the trip. A load that crosses more than once reads accepted only when every crossing is, and shows the worst one otherwise.
If the plan changes after filing, Roadmark compares the load with what was filed, lists the changes, and sends the correction through BorderConnect, up to the moment the truck reaches the border. After arrival or release, a change goes through the customs broker or the port.
How far ahead the manifest must arrive
The deadlines are the agencies', not BorderConnect's or Roadmark's:
- ACE (into the U.S.): CBP must receive the manifest one hour before the truck reaches the first U.S. port of arrival, or 30 minutes before for shipments that qualify for CTPAT, as 19 CFR 123.92 allows.
- ACI (into Canada): the CBSA must receive and validate the data no later than one hour before arrival, and no earlier than 30 days before. Memorandum D3-4-2 sets no shorter time for FAST carriers. A late transmission is accepted with an "insufficient review time" warning, and a penalty may apply.
PARS and PAPS numbers
The PAPS number (U.S.) and PARS number (Canada) tie your manifest to the customs broker's release. Roadmark numbers each shipment from your own series, starting with your carrier code: the SCAC for PAPS, the CBSA carrier code for PARS. It prints the cover sheet with the barcode and the labels, files the paper on the load against the shipment and the crossing, and can email the number and the cover sheet to the covering carrier's dispatch from your company's mailbox, with the customs broker copied. The CBSA's label rules and CBP's truck FAQ set the formats.
One account, several companies
BorderConnect lets a service provider file for several companies from one account, each under its own carrier code. In Roadmark, each company connects once with the company key BorderConnect gave it, so Ashgrove Freight's manifests go out under Ashgrove Freight's codes and a sister company's under its own. See Canadian TMS for the rest of what Roadmark does for carriers on both sides of the border.
Questions about BorderConnect and Roadmark
What is BorderConnect?
BorderConnect is an eManifest service founded in Windsor, Ontario, in 2004. Carriers use it to file ACE eManifests with U.S. Customs and Border Protection and ACI eManifests with the Canada Border Services Agency. The CBSA lists it as a registered ACI highway service provider, and it appears on CBP's list of tested ACE truck manifest software developers.
Do I need my own BorderConnect account?
Yes. Roadmark files through your BorderConnect account, under your own carrier code for each direction: the SCAC into the U.S. and the CBSA carrier code into Canada. If BorderConnect files for several of your companies, each company connects once and files under its own code.
Does Roadmark send anything to CBP or the CBSA directly?
No. Roadmark composes the manifest and sends it to BorderConnect, which files it. The importer's entry or release is still filed by the customs broker against the same PAPS or PARS number.
Can an AI agent file an eManifest?
No. A person with permission to file does it, or the company's File when complete setting files a crossing once nothing is missing. That setting is off by default and set per direction. An agent never files.
How do we know the manifest was accepted?
BorderConnect posts each answer to Roadmark, and the crossing shows it: sent, accepted, rejected with the reason, held for examination, or released. A load with several crossings shows its worst one, and reads accepted only once every crossing is.
Can we correct a manifest after it's filed?
Yes, until the truck reaches the border. Roadmark sends the correction through BorderConnect and lists what changed. Shipments can be taken off an ACE manifest from Roadmark; taking one off an ACI manifest is done in BorderConnect. After arrival or release, a change goes through the customs broker or the port.
Does Roadmark handle PARS and PAPS numbers?
Yes. Roadmark numbers each shipment from your PARS or PAPS series with your carrier code, prints the cover sheet with the barcode and labels, and can email it to the covering carrier's dispatch with the customs broker copied.

See it with the systems you run.
Tell us what you run today. In the call, we show you what connects to Roadmark and how, on your own lanes and customers.
- Your lanes, customers and carriers, not a canned demo
- Beside the TMS you run today
- No commitment to switch anything