Skip to content
roadmark

Glossary

EDI 210: what a freight invoice carries and why it gets rejected

EDI 210 is the carrier's X12 freight invoice. What's in it, a sample with linehaul, fuel and detention lines, how it ties to the 204, and why 210s get rejected.

Definition

What is EDI 210?

An EDI 210 (X12 Motor Carrier Freight Details and Invoice) is the carrier's freight bill, sent electronically to whoever pays for the load. It gives the invoice number, the shipment ID from the 204, the references, the weight, and each charge (linehaul, fuel surcharge, detention and other accessorials) with the total due.

Also called Motor Carrier Freight Details and Invoice and freight invoice

A 210 is the last document of an EDI load: the carrier's bill. X12 says it can be sent as an invoice requesting payment, or as details of the charges on a shipment. Either way, the payer's system reads it line by line and checks it against what it tendered, so a 210 that doesn't match gets held or rejected.

When it's sent, and by whom

The carrier sends the 210 to the party paying for the load, the bill-to on the 204: the shipper, or the broker that hired the carrier. A broker in the middle usually receives 210s from its carriers and sends its own 210 to its customer.

It goes out after delivery, once the carrier can bill the final charges. That usually means the signed POD is in, and any detention or other accessorial is known and, where the customer requires it, approved.

What's in a 210

Inside the usual envelope (the ISA and GS segments), the transaction set runs from ST to SE:

SegmentWhat it holds
B3The invoice number, the shipment ID from the 204, payment method, invoice date, net amount due, delivery date, SCAC
C3The currency
N9References: bill of lading, PO and any number the payer asked for
N1The bill-to, shipper and consignee, with N4 for their locations
LXOpens a line of the invoice
L5What was shipped
L0Weight and quantity
L1One charge: the rate, the amount and a charge code
L3The totals: weight and the amount due
SEThe end of the set, with a count of its segments

A sample 210

Ashgrove Freight billing Prairie Foods for load 48213 on Wednesday: $3,655.00 linehaul, $560.00 fuel surcharge and $100.00 for 1 h 20 m of detention at $75.00 an hour, $4,315.00 in all. The companies, IDs, charge codes and figures are fictional, and the envelope is left out.

ST*210*0001~
B3**INV10442*PF778201*PP*L*20261021*431500**20261020*035*ASHG~
C3*USD~
N9*BM*BOL778201~
N9*PO*4500018821~
N1*BT*PRAIRIE FOODS~
N1*SH*PRAIRIE FOODS DC~
N4*MISSISSAUGA*ON**CA~
N1*CN*JOLIET DC~
N4*JOLIET*IL**US~
LX*1~
L5*1*PACKAGED FOOD~
L0*1***26000*G***26*PLT~
L1*1*3655*FR*365500****400~
L1*2*560*FR*56000****FUE~
L1*3*100*FR*10000****DET~
L3*26000*G***431500~
SE*18*0001~

B3 carries invoice INV10442 for shipment PF778201, prepaid, dated October 21, 2026, for $4,315.00 (two implied decimals, so 431500), delivered October 20 (035 means delivered). The N9 lines repeat the bill of lading and PO numbers from the tender. Each L1 is one charge with its own code; the codes here are placeholders, because every payer's guide lists the codes it accepts. L3 totals the weight and the amount due.

How it relates to the 204, 990 and 214

The 210 is the last of four documents about the same load:

  1. 204: the shipper or broker offers the load, with the rate and references.
  2. 990: the carrier accepts it.
  3. 214: the carrier reports each stop, with arrival and departure times.
  4. 210: the carrier bills the load.

The payer checks the 210 against the other three: the rate against the 204, the references against the 204's L11 numbers, and detention against the times on the 214s. Each one that doesn't line up is a reason to hold the invoice.

Common mistakes

  • A total that doesn't match the tender. If the 204 said $4,215.00 and the 210 says $4,315.00, the $100.00 difference needs its own line, with a code the payer accepts.
  • Missing or retyped references. The payer matches on the shipment ID and the PO or bill of lading number. One wrong digit and the invoice can't find its load.
  • Unapproved accessorials. Many payers only pay detention, layover or lumper charges they approved before the invoice. Times from the 214s help, but they don't replace the approval.
  • Billing before the POD. A 210 for a load the payer's system hasn't seen delivered is often held until it has.
  • Charge codes from another customer. Codes for fuel, detention or stop-offs differ between payers. Use each payer's own list.
  • Resending a corrected invoice as if it were new. Fix a 210 the way the payer's guide says, usually with a correction indicator or a new invoice number, so it isn't paid twice or rejected as a duplicate.

How Roadmark handles 210s

Roadmark sends the 210 once the POD is in and the invoice is approved, with detention and any other accessorial itemized. It's the same invoice Billing drafts on POD from the load's stops and times, so what your customer's system receives matches what your team approved.

Each customer is set up as its own trading partner, from their implementation guide, and you check the 990, 214s and 210 from one real load before turning it on for everything. See the EDI integration page for the setup.

Where it fits in a load.

Four EDI documents carry a truckload from the tender to the invoice, in this order.
  1. 204

    EDI 204

    The shipper or broker offers the carrier a load.

  2. 990

    EDI 990

    The carrier accepts or declines the tender.

  3. 214

    EDI 214

    The carrier reports where the load is, stop by stop.

  4. 210

    EDI 210

    The carrier bills the load once it's delivered.

    This page

EDI 210: common questions

What is an EDI 210?

It's the X12 Motor Carrier Freight Details and Invoice: the carrier's bill for a load, sent electronically to the party paying. It lists each charge with the total due, and quotes the shipment ID and references from the 204 so the payer can match it.

When is a 210 sent?

After delivery, once the carrier has what it needs to bill: usually the signed POD and the final charges. Some payers also accept a 210 as details of the charges before the invoice itself.

Why do 210s get rejected?

Most often because they don't match: a total that differs from the tendered or contracted rate, a missing or retyped shipment ID or PO, an accessorial the payer didn't approve, or a charge code that isn't on the payer's list.

How are accessorials like detention shown on a 210?

Each one is its own charge line, with an amount and a code from the payer's guide. Detention is usually backed by the arrival and departure times the carrier reported on its 214s.

Is a 210 the same as a paper freight bill?

It carries the same information, as structured data the payer's system can audit and pay without anyone keying it in. Many shippers require it from carriers that haul a lot of their freight.

When does Roadmark send the 210?

Once the POD is in and the invoice is approved. Detention and any other accessorial are itemized on it, and it comes from the same invoice Billing drafts on POD.

Bring a customer's EDI guide. We'll walk a load through it.

Send us the implementation guide one of your customers gave you. In the call, you'll see how a 204 like theirs becomes a load in Roadmark, and the 990, 214s and 210 that go back.

  • Your customer's implementation guide
  • The IDs you trade under today
  • Beside your current TMS

Thirty minutes. No slides.

We use this to reply to your request. Privacy policy.