Skip to content
roadmark

Glossary

EDI 990: how a carrier accepts or declines a load tender

EDI 990 is the carrier's X12 reply to a 204 load tender: accept or decline. When it's due, what's in it, a short sample, and how it differs from a 997.

Definition

What is EDI 990?

An EDI 990 (X12 Response to a Load Tender) is the carrier's answer to a 204: it accepts or declines the load. It echoes the shipper's shipment ID, gives the date and an action code (A to accept, D to decline), and often adds the carrier's own reference number. It goes back before a truck is assigned, usually within a deadline the shipper sets.

Also called Response to a Load Tender and tender response

A 990 closes the first exchange of an EDI load. The shipper or broker sent a 204 offering a load; the 990 is the carrier's yes or no. It's short, it's urgent, and until it arrives the load isn't the carrier's.

When it's sent, and by whom

The carrier sends the 990 to whoever sent the 204: the shipper, or a broker acting for the shipper. A broker that tenders the load on to a carrier by EDI receives that carrier's 990 in turn.

Timing is the part that matters. A 990 goes back after the 204 arrives and before a truck is assigned, and most shippers put a deadline on it. A tender that isn't answered in time is commonly treated as declined, and the load goes to the next carrier in the shipper's routing guide. Shippers also track how often each carrier accepts, so a slow or patchy record of 990s can cost you freight later.

What's in a 990

The transaction set is small. Inside the usual envelope (the ISA and GS segments), it runs from ST to SE:

SegmentWhat it holds
B1The carrier's SCAC, the shipment ID from the 204, the date and the action code: A accepted, D declined
N9A reference, most often the carrier's own number for the load (qualifier CN), so later documents can quote it
SEThe end of the set, with a count of its segments

Some partners ask for more, such as a reason on every decline or a pickup date. Their implementation guide says which.

A sample 990

Ashgrove Freight accepting Prairie Foods' tender for shipment PF778201 on Monday, and giving its own load number, 48213. The companies, IDs and figures are fictional, and the envelope is left out.

ST*990*0001~
B1*ASHG*PF778201*20261019*A~
N9*CN*48213~
SE*4*0001~

B1 carries the answer: carrier ASHG, shipment PF778201, October 19, 2026, A for accepted. A decline is the same segment ending in D. N9*CN gives the carrier's reference, which the shipper can match against the 214s and the 210 that follow. SE*4 counts the four segments.

How it relates to the 204, 214 and 210

The 990 is the second of four documents about the same load:

  1. 204: the shipper or broker offers the load.
  2. 990: the carrier accepts or declines it.
  3. 214: once accepted, the carrier reports status as the load moves.
  4. 210: after delivery, the carrier bills the load.

A decline ends the conversation for that carrier. An acceptance commits it to the load, and the shipment ID in B1 must match the 204's exactly, or nothing after it lines up.

Common mistakes

  • Answering late. The deadline on a tender is real. A 990 sent after it may arrive at a load that's already gone to another carrier.
  • Sending a 997 and stopping there. The 997 says the 204 was received. The shipper is still waiting for the 990.
  • Retyping the shipment ID. The 990 has to quote the 204's shipment ID exactly. A typo leaves the shipper with an unanswered tender and a 990 it can't place.
  • Accepting what you can't cover. An accepted tender you hand back later hurts more than a decline, both on the load and on the shipper's scorecard.
  • Not answering changes. If the shipper sends a changed 204 for a load you've accepted, check whether their guide expects a new 990 for the change.

How Roadmark handles 990s

When a 204 comes in, Roadmark turns it into a load, priced at the contract rate, waiting for dispatch to accept. The moment dispatch accepts or declines, Roadmark sends the 990, before a truck is assigned, so the answer never waits on planning. For brokers, it works in reverse as well: when a load is tendered to a carrier by EDI, the carrier's 990 comes back into Roadmark.

Each customer is set up as its own trading partner, and you test with one real tender before turning it on for everything. See the EDI integration page for how setup works.

Where it fits in a load.

Four EDI documents carry a truckload from the tender to the invoice, in this order.
  1. 204

    EDI 204

    The shipper or broker offers the carrier a load.

  2. 990

    EDI 990

    The carrier accepts or declines the tender.

    This page

  3. 214

    EDI 214

    The carrier reports where the load is, stop by stop.

  4. 210

    EDI 210

    The carrier bills the load once it's delivered.

EDI 990: common questions

What is an EDI 990?

It's the X12 Response to a Load Tender: the carrier's electronic answer to a 204, accepting or declining the load. It quotes the 204's shipment ID so the shipper's system knows which tender it answers.

How fast does a 990 have to go back?

As fast as the shipper's terms say. Many shippers set a response window on each tender, and a tender that isn't answered in time is often treated as declined and offered to the next carrier in their routing guide.

What's the difference between a 990 and a 997?

A 997 is a functional acknowledgment: it confirms the 204 arrived and could be read. The 990 is the business answer, accept or decline. A shipper waiting for a 990 doesn't count a 997 as one.

Do I need to give a reason when I decline?

Only if the shipper asks for one. Some implementation guides want a reason on every decline, as a code from their own list or a short remark; others take the decline alone.

Can a carrier accept a tender and change the rate in the 990?

Usually not. A 990 accepts or declines the tender as it was sent. A different rate or date is a conversation with the shipper, often ending in a changed 204 that you then accept.

When does Roadmark send the 990?

The moment dispatch accepts or declines the tender, before a truck is assigned. Roadmark also takes 990s back from carriers when a broker tenders a load to them by EDI.

Bring a customer's EDI guide. We'll walk a load through it.

Send us the implementation guide one of your customers gave you. In the call, you'll see how a 204 like theirs becomes a load in Roadmark, and the 990, 214s and 210 that go back.

  • Your customer's implementation guide
  • The IDs you trade under today
  • Beside your current TMS

Thirty minutes. No slides.

We use this to reply to your request. Privacy policy.